The BMW E28 Wheel and Tire Tutorial: Difference between revisions
From The E28 Wiki
mNo edit summary |
Added link to trimming diagram. |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
''By | ''By [https://www.mye28.com/memberlist.php?mode=viewprofile&u=6419 Shawn D.]'' | ||
As with most any vehicle, one of the easiest ways to change the look and performance of an E28 is by changing the wheels and tires, and this tutorial is geared to helping you find a setup that fits properly. Considering the range of opinion with regard to appearance, performance goals, driving environment, and one's financial wherewithal, trying to determine which setup is "best" is rather subjective and won't be discussed here. | As with most any vehicle, one of the easiest ways to change the look and performance of an E28 is by changing the wheels and tires, and this tutorial is geared to helping you find a setup that fits properly. Considering the range of opinion with regard to appearance, performance goals, driving environment, and one's financial wherewithal, trying to determine which setup is "best" is rather subjective and won't be discussed here. | ||
| Line 108: | Line 108: | ||
|Trimming | |Trimming | ||
|A Dremel or die grinder with an abrasive cutoff wheel is used to remove a slice of the inner fender lip at the interference point. | |A Dremel or die grinder with an abrasive cutoff wheel is used to remove a slice of the inner fender lip at the interference point. | ||
See this diagram for more information on this technique. | [https://i.imgur.com/s7WpCW2.jpg See this diagram for more information on this technique.] | ||
|Pros: Maintains fender lip profile. The more precise of the two methods. Does not crack paint or undercoating, and does not leave a grit-attracting pinched channel. Easy to touch up raw edges with paint or undercoating. | |Pros: Maintains fender lip profile. The more precise of the two methods. Does not crack paint or undercoating, and does not leave a grit-attracting pinched channel. Easy to touch up raw edges with paint or undercoating. | ||
Cons: Takes more time. Can burn paint close to cut and affect temper of the metal if not done carefully. Slightly reduced fender lip strength. | Cons: Takes more time. Can burn paint close to cut and affect temper of the metal if not done carefully. Slightly reduced fender lip strength. | ||
